MERAKRCF405

MERAKRCF405 flight control is carefully optimized layout, so that users can be more concise,convenient wiring,.For ensure a good flight experience ,we use of high-performance MPU6000 gyroscope. After a long flight verification test, the flight control ensures stable flight performance. For details of flight control, please visit MERAK RC website:(http://www.merakrc.com)

Hardware

• Processors and Sensors

  • *MCU: STM32F722RET6
  • IMU_1 MPU6000(0 deg)
  • OSD: BetaFlight OSD (AT7456E)
  • Blackbox: FLASH W25Q128 (16MB)

• 6 DShot outputs

• 5 UARTs (UART5 support SerialRC)

• Stable voltage regulation,9V/2A DCDC BEC for VTX/camera etc.5V/2A DCDC BEC for FC/WS2812 etc.

• Independent camera control.

Pinout

All uarts have pad on board

Value	Identifier	RX	TX	Notes
1	USART1	PA10	PA9
2	USART2	PA3	PA2
3	USART3	PB11	PB10
4	USART4	PC11	PC10
5	USART5	PD2	PC12	Rx input

Buzzer/LED output

Value	Identifier	function	pin	Notes
1	LED0	LED	PC13
2	BEEPER	BEEP	PC14

VBAT input, Current input, Analog RSSI input

Value	Identifier	function	pin	Notes
1	ADC1	VBAT	PC2
2	ADC1	CURRENT	PC1
3	ADC1	RSSI	PC3

PWM Input & PWM Output & LED strip & Camera control

Value	Identifier	function	pin	Notes
1	TIM8_CH3	PPM	PC8
2	TIM3_CH1	Motor1	PC6
3	TIM3_CH2	Motor2	PC7
4	TIM5_CH1	Motor3	PA0
5	TIM5_CH2	Motor4	PA1
6	TIM3_CH3	Motor5	PB0
7	TIM1_CH3N	Motor6	PB1
8	TIM4_CH3	LED strip	PB8
9	TIM11_CH1	CAM Control	PB9

Gyro & ACC MPU6000

Value	Identifier	function	pin	Notes
1	SPI2	SCK	PB13	MPU6000
2	SPI2	MISO	PB14	MPU6000
3	SPI2	MOSI	PB15	MPU6000
4	SPI2	CS1	PB12	MPU6000_CS
5	IO	INT2	PC4	MPU6000_INT

OSD MAX7456

Value	Identifier	function	pin	Notes
1	SPI3	SCK	PB3
2	SPI3	MISO	PB4
3	SPI3	MOSI	PB5
4	SPI3	CS	PA15

FLash Blackbox

Value	Identifier	function	pin	Notes
1	SPI1	SCK	PA5
2	SPI1	MISO	PA6
3	SPI1	MOSI	PA7
4	SPI1	CS	PA4