DALRCF405

This board use the STM32F405RGT6 microcontroller and have the following features:

1024K bytes of flash memory,192K bytes RAM,168 MHz CPU/210 DMIPS
The 16M byte SPI flash for data logging
USB VCP and boot select button on board(for DFU)
Stable voltage regulation,9V/2A DCDC BEC for VTX/camera etc.And could select 5v/9v with pad
Serial LED interface(LED_STRIP)
VBAT/CURR/RSSI sensors input
Suppose IRC Tramp/SmartAudio/FPV Camera Control/FPORT/telemetry
Supports SBus, Spektrum1024/2048, PPM. No external inverters required (built-in).
Supports I2C device extend(baro/compass/OLED etc)
Supports GPS

Value	Identifier	RX	TX	Notes
1	USART1	PB7	PA9	PB7 FOR SBUS IN(inverter build in)
2	USART2	PA3	PA2	PAD USE FOR TRAMP/SmartAudio
3	USART3	PB11	PB10	USE FOR GPS
4	USART4	PA1	PA0	PA0 FOR RSSI/FPORT/TEL etc
5	USART5	PD2	PC12	PAD

Value	Identifier	function	pin	Notes
1	I2C1	SDA	PB9	with GPS outlet
2	I2C1	SCL	PB8	with GPS outlet

Value	Identifier	function	pin	Notes
1	LED0	LED	PC14
2	BEEPER	BEE	PC13

Value	Identifier	function	pin	Notes
1	ADC1	VBAT	PC2	DMA2_Stream0
2	ADC1	CURR	PC1	DMA2_Stream0
3	ADC1	RSSI	PA0	DMA2_Stream0
4	ADC1	extend	PC0	DMA2_Stream0 extend for other senser(PAD)

Value	Identifier	function	pin	Notes
1	TIM12_CH2	PPM	PB15	PPM
2	TIM3_CH3	OUPUT1	PB0	DMA1_Stream7
3	TIM8_CH1	OUPUT2	PC6	DMA2_Stream2
4	TIM1_CH3	OUPUT3	PA10	DMA2_Stream6
5	TIM1_CH1	OUPUT4	PA8	DMA2_Stream1
6	TIM8_CH3	OUPUT5	PC8	DMA2_Stream4
7	TIM3_CH4	OUPUT6	PB1	DMA1_Stream2
8	TIM3_CH2	OUPUT7	PC7	DMA1_Stream5 NO PAD
9	TIM8_CH4	OUPUT8	PC9	DMA2_Stream7 NO PAD
10	TIM4_CH1	PWM	PB6	DMA1_Stream0 LED_STRIP
11	TIM2_CH1	PWM	PA5	FPV Camera Control(FCAM)

Value	Identifier	function	pin
1	SPI1	SCK	PB3
2	SPI1	MISO	PA6
3	SPI1	MOSI	PA7
4	SPI1	CS	PC4

Value	Identifier	function	pin
1	SPI3	SCK	PC10
2	SPI3	MISO	PC11
3	SPI3	MOSI	PB5
4	SPI3	CS	PA15

Value	Identifier	function	pin
1	SPI2	SCK	PB13
2	SPI2	MISO	PB14
3	SPI2	MOSI	PC3
4	SPI2	CS	PB12

###Designers